Request for Information on Combat Boot Sock
- Client
- Dept of Defense
- RFP Number
- —
- Posted
- 10/2/2026
- Category
- US Federal
- Budget
- —
- NAICS
- 315120
- Set-aside
- —
- Contact
- Harvey Walker
- [email protected]
Description
AI GeneratedThe U.S. Marine Corps Portfolio Acquisition Executive Marine Corps needs to identify potential sources capable of manufacturing a high-performance combat boot sock. The requested scope requires a durable, over-the-calf sock featuring graduated compression, arch support, nylon-reinforced heel and toe, and a material composition of at least 52% wool, 20% nylon, and 1% spandex with no cotton or rayon. Interested vendors must submit their capability responses electronically to the designated government email addresses by October 30, 2026, at 5:00 PM EST. This announcement is a Request for Information for market research and planning purposes only, and the government does not specify eligibility criteria, evaluation criteria, contract term, or budget.
Key solicitation details
AI-extracted from Table II. Sock performance requirement.docx. Confirm against the original documents before bidding.
The U.S. Marine Corps is conducting market research to identify potential sources capable of manufacturing a durable, high-performance combat boot sock. The socks must meet specific salient characteristics and technical requirements outlined in Purchase Description MC-PD-24-003. Responses will assist the government in planning for potential future acquisitions.
- Issued by
- U.S. Marine Corps Portfolio Acquisition Executive Marine Corps
- Responses due
- October 30, 2026 by 5 PM EST
- How to submit
- Electronic
- Submission details
- Submit responses electronically to designated redacted email addresses by the response deadline.
Scope of work
- Manufacture combat boot socks meeting Purchase Description MC-PD-24-003
- Over-the-calf socks with cushioning comfort, graduated compression, and non-slip top cuff
- Contoured foot, arch support, gore heel and toe, and nylon reinforcement
- Seamless or recessed toe closure
- Material composition of minimum 52% wool, 20% nylon, 1% spandex, and no cotton or rayon
Minimum qualifications
- Capability to produce socks meeting Purchase Description MC-PD-24-003 and Table II requirements
Official SAM.gov notice
- Solicitation number
- RequestForInformationOnCombatBootSock
- Agency
- Department of Defense
- Buying office
- Dept of the Army › W6QK ACC-APG Natick
- Notice type
- Sources Sought
- Responses due
- Oct 30, 2026, 5:00 PM ET
- Posted on SAM.gov
- Sep 30, 2026
- NAICS
- 315120 · Apparel Knitting Mills
- Product/service code
- 8430
- Place of performance
- Natick, MA, 01760
- Contracting contact
- Harvey Walker
[email protected] - Additional contact
- Mary Prebensen
[email protected]
Read the official notice description
SYNOPSIS: This Sources Sought Announcement is to assist the U.S. Marine Corps Portfolio Acquisition Executive Marine Corps (PAE MC) to identify potential sources to provide a Combat Boot Sock. The goal is to provide warfighting capability and mission support in various environments by enhancing foot comfort, durability, and performance for military personnel. The Government requests that responses be submitted electronically to [email protected] and [email protected] by October 30, 2026 by 5 PM EST. Background: Program Manager Combat Support Systems (PM CSS) is conducting market research to identify potential sources capable of manufacturing a high-performance combat boot sock that meets the requirements of Purchase Description MC-PD-24-003. The sock is intended for use with the applicable standard-issue combat boots identified in the purchase description. This Request for Information (RFI) is issued for market-research and planning purposes only and does not constitute a solicitation, request for proposal, or commitment by the Government to procure any product or service. Description: The Marine Corps is seeking sources capable of manufacturing a durable, reliable combat boot sock designed to provide comfort, protection, and performance during demanding operational use. The sock shall meet the following Salient Characteristics specified in Purchase Description MC-PD-24-003, including, but not limited to, the following key requirements: Sock shall feature an over-the-calf length with cushioning comfort to protect the wearer from hot spots, pressure points, and blisters when wearing combat boots, and they provide graduated compression to promote blood flow from the foot with a non-slip top cuff opening. The foot of each sock includes contouring for the sock to stay in place without bunching, arch support, a gore heel and toe for improved fit, and nylon reinforcement at the heel and toe for durability. A seamless toe closure or a recessed closure with equivalent low profile is used for comfort and durability. Basic Materials. The sock shall contain wool a minimum of 52% wool (no coarser than US 60s (25 microns or finer)), a minimum of 20% nylon, and a minimum of 1% spandex and shall not contain cotton or rayon fiber. Shade. Shall be in accordance with section 3.3 of the Purchase Description Visual shade matching. Shall be in accordance with section 3.4 of the Purchase Description The finished socks shall conform to the requirements specified in table II when tested as specified. **Please refer to Table II. Sock performance requirement** Deliverables: This is a Sources Sought Announcement / RFI to identify potential sources. Based on responses, the Government may plan for a future acquisition. Interested parties should demonstrate their capability to produce socks meeting the above requirements. The Government may request samples for future evaluation. Submission Instructions: THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY. This is not a solicitation, and no contract will be awarded from this announcement. Responses are for information and planning purposes only. This Sources Sought Announcement does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Marine Corps has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned. Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized in the SAM.gov website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject. RESPONSES: Interested parties may identify their interest and capability by sending responses regarding this requirement to PAE MC via e-mail ONLY to [email protected] no later than October 30, 2026 by 5:00 p.m. EST. The U.S. Government will not pay for any information or administrative cost incurred in response to this notice. All costs associated with responding to this Notice will be solely at the expense of the interested party. Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. If you hold a GSA Federal Supply Schedule contract, please identify your contract number. QUESTIONS: Any questions for clarification may be emailed to [email protected] no later than October 26, 2026 by 5:00 p.m. EST. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement.
Source: SAM.gov contract opportunities data (U.S. federal public data).
Incumbent
No incumbent history found for this requirement. The notice does not cite a current contract, and no earlier award from this buying office matches it.
Market context
Awards in the same category (Apparel Knitting Mills). This is not this requirement's award history.
Recent similar awards: Department of Defense, NAICS 315120, performed in MA
| Vendor and award | Value | Ends |
|---|---|---|
| COMMUNITY WORKSHOPS, INC.SPMYM323P4022 · LINER HATS | $113.0K | Jan 25, 2024 |
Top vendors in this category: Department of Defense, NAICS 315120, since Oct 1, 2024
391 contract awards in this NAICS over the period.
- 1. SOUTHEASTERN KENTUCKY REHABILITATION INDUSTRIES, INC$17.8M
- 2. GRAHAM DYEING & FINISHING INC$12.3M
- 3. PUERTO RICO INDUSTRIES FOR THE BLIND CORP$9.5M
- 4. BETHEL YUUT LLC$7.9M
- 5. GOODWILL INDUSTRIES OF SOUTH FLORIDA INC$5.8M
Source: USAspending.gov federal award data (U.S. federal public data). A contract is called the incumbent only when the notice or its documents cite it by number.
Source and verification
Cached documentsCraxy AI summarizes this opportunity from the source listing and available solicitation documents. Confirm submission instructions and amendments with the issuing source before responding.
Personalized fit score
Sign up free to see how well this opportunity fits your company — based on your saved profile.
Sign up to see your fit score